Return Journey Tracking and Deviation-Correcting Device

The return tracking and deviation-correcting device controls the direction of the belt by regulating the horizontal deflection of the roller through the frictional forces at both ends of the roller. The two ends of the deviation-correcting idler are designed with a special conical structure, which achieves rapid deviation correction by utilizing the different forces exerted by the conical sections on the belt. The roller adopts a multi-seal ring structure, ensuring that the roller sleeve maintains normal operation under load conditions. It features an exquisite design, simple installation, and convenient maintenance.

Industrial Automatic Misalignment-Correcting Idler Assembly

This automatic deviation-correcting idler device offers precise real-time correction, stable and reliable operation across varied conditions, easy installation/maintenance with modular design, strong adaptability to different belts and industrial environments, and wear-resistant durability for extended service life.

Full-Automatic Laser Coal Inventory Instrument

The system employs a 2D high-frequency laser scanner to conduct high-frequency cross-sectional scanning on the surface of the coal yard, obtaining high-density cross-sectional data. By combining the material yard length data acquired by the stroke measuring device and the scanner deflection angle data obtained by the return measuring device, it realizes the calculation of the material yard volume and the display of the 3D model of the material yard. Additionally, it can print out the measurement results and graphics in the form of reports, thus forming a brand-new measurement method.

Dust suppression and blocking prevention curve drop pipe

The wear-resistant, dust-suppressing and blocking-preventing curved material drop pipe adopts a streamlined structure to control the flow rate and direction of the material at the transfer point. By controlling the flow pattern of the material, the generation of floating dust and induced air volume is minimized, and the air pressure inside the drop pipe and the guide trough is reduced, thus realizing dust suppression, solving the problems of material blocking, wear, noise, reducing damage, etc.

Shrimp Curve Anti-Blocking & Cleaning Vibrating Coal Hopper

This intelligent shrimp-curve vibrating coal hopper prevents blockage, sticking and flow interruptions for bulk materials, especially wet, sticky coal and slime.

High-Efficiency Sintered Plate Dust Collector

Sintered plate is a rigid filter plate made by sintering polyethylene powder into a matrix and coating PTFE on its surface.

Intelligent Cleaning Robot for Residual Coal in Train Carriages

The Intelligent Cleaning Robot for Residual Coal in Train Carriages is an intelligent equipment designed for cleaning residual coal in coal-carrying carriages after unloading. It mainly addresses the pain points of manual cleaning, such as low efficiency, high labor intensity, poor working environment, and incomplete cleaning.

Heavy-Duty First-Stage Cleaner (Heavy-Wear Polyurethane Scraper)

The first sweeper is mainly made of polyurethane material for the blade head. Generally, the first sweeper is mainly used for cleaning large particle media and materials in the first sweeper. The physical properties of polyurethane determine its widespread use on the sweeper blade head.

High-Performance Secondary Cleaning Scraper (Long-Lasting Polyurethane Wiper)

The Second-Stage Cleaner (Polyurethane Scraper), a core belt conveyor cleaning device with a herringbone polyurethane scraper, large buffer base, and adjustable pressure/angle components, suits reverse-running belts and efficiently cleans fine, wet, sticky materials in mining, chemical, and other industries.

Industrial-Grade Primary Scraping Device (Wear-Resistant Alloy Blade)

The Belt Cleaner (Alloy Scraper) is a high-efficiency device designed for removing residual materials from belt conveyors. Featuring a straight-blade structure, it maintains stable low contact force with the belt, enabling precise cleaning while minimizing belt wear.

Industrial-Grade Secondary Cleaning Scraper (Wear-Resistant Alloy Blade)

The Second-Stage Cleaner (Alloy Scraper) is a high-efficiency belt conveyor cleaner with a precision-flat alloy blade, effectively removing fine, wet, and sticky residues while minimizing belt wear.

Industrial-Grade Primary Scraping Device (Dual-Blade Wear-Resistant Alloy Wiper)

The high-efficiency Belt Cleaner (Dual-Head Alloy Scraper) with a staggered upper-lower blade structure eliminates gaps to fully clear fine particles, boasting long-lasting, impact-resistant alloy heads for reliable performance in complex continuous operations.

High-Performance I-Profile Reversible Empty Segment Cleaner

The high-efficiency Reversible Empty Section Cleaner (or "Empty Section Straight Blade Cleaner") fits belt conveyor return sections near tail/vertical tensioner pulleys, using a specialized blade to remove slime, ore, and dust—discharging debris unidirectionally to prevent belt issues, suiting bidirectional conveyors or narrow tunnels in coal mines, power plants, etc., for continuous operation and cost savings.

High-Performance V-Profile Return Run Cleaner

The empty section cleaner is suitable for cleaning non working surfaces of conveyor belts. The cleaning scraper is made of polyurethane board, and its blade head is wear-resistant, corrosion-resistant, and resistant to breakage without damaging the belt, ensuring high safety.

Industrial-Grade Chain-Type Scraper Cleaning Machine

The Chain Scraper Cleaner is a key device for solving material accumulation at the belt conveyor head. Suitable for various conveyor systems (especially high-automation ones), it collects materials that the head cleaner fails to clear and sends them to the discharge hopper. It supports timed startup (cleaning chain runs 2-3 cycles to finish), requires little manual operation, and is energy-saving, eco-friendly, and ideal for stable conveyor system operation.

Conveyor Buffer Slider Beds Adjustable Conveyor Impact Slider Bed Design

The surface material of the buffer strip, UHMW-PE, is smooth and wear-resistant, which can reduce frictional resistance and extend its lifespan. The middle layer of the buffer strip is made of high elasticity natural heat rubber, which can effectively reduce the impact of materials on the belt, thereby reducing the wear of materials on the belt. It is easy to install and maintain on site.

Industrial Spill Containment Skirting Board

The pressing component comes in two types—butterfly nut locking and handle locking—for quick assembly/disassembly. Angle steel pressure on both sides is independently adjustable to ensure uniformity and prevent side seal detachment.

Power-Free Dust Suppression Chute

Advanced dry mist dust suppression system with excellent quality, high efficiency, dust reduction and safety assurance

The micrometer level dry mist dust suppression device is driven by compressed air to create a sonic oscillator. Through the sound explosion of high-frequency sound waves, water is highly atomized at the resonance chamber of the nozzle, producing fine water mist particles below 10 μ m (mist with a diameter below 10 μ m is called dry mist) that are sprayed towards the dust source. The water mist particles collide, bond, and aggregate with the dust particles, and settle under their own gravity to achieve dust suppression.

Dust removal dust suppression fully automatic fog cannon machine remote control fog sprayer

The remote intelligent fog cannon machine is a high-performance product with a wide range of applications and is often used in various fields. Using a high-pressure water pump to inject water through a pipeline into a high-pressure nozzle for atomization and spraying, and then using the high-speed airflow generated by a fan to push the water mist to a longer distance, where the water mist and dust condense.

Aerosol Dust Removal System

Aerosol dust removal equipment overcomes the drawbacks of traditional spray-type dust removal equipment, such as large volume, low dust removal capacity and high water consumption, and significantly improves the dust removal effect.

Wear-Resistant Ceramic Liner

Wear resistant flange ball valve industrial valve accessories multi specification steam manual American standard flange ball valve

A new series of wear-resistant materials lined with wear-resistant ceramic materials is quietly leading the wear-resistant materials industry. Ceramic steel pipe is a composite pipe formed by organically combining ceramics and metals. Widely used for conveying coal powder, ash residue, mining powder, tailings, backfill materials, coal in coal mines, beneficiation plants, coke particles in coking plants, materials in sintering plants, etc. Its service life is more than 15 times longer than ordinary steel pipes, and it can also be used for conveying aluminum liquid and corrosive media.

Backpack wear-resistant elbow wear-resistant corundum ceramic bent pipe bimetallic lining ceramic patch shrimp waist

A new series of wear-resistant materials lined with wear-resistant ceramic materials is quietly leading the wear-resistant materials industry. Ceramic steel pipe is a composite pipe formed by organically combining ceramics and metals. Widely used for conveying coal powder, ash residue, mining powder, tailings, backfill materials, coal in coal mines, beneficiation plants, coke particles in coking plants, materials in sintering plants, etc. Its service life is more than 15 times longer than ordinary steel pipes, and it can also be used for conveying aluminum liquid and corrosive media.